SPI Interface 1.3 Inch Circular LCD Display 240x240 With 300 Nits Brightness

1. The LCD module is made of glass. Don't give excessive external shock, or drop from a high place.

2. If the TFT LCD screen is damaged and the liquid crystal leaks out, do not lick and swallow. When the liquid

is attach to your hand, skin, cloth etc, wash it off by using soap and water thoroughly and immediately.

3. Don't apply excessive force on the surface of the LCM.

4. If the surface is contaminated, clean it with soft cloth. If the LCM is severely contaminated, use Isopropyl alcohol/Ethyl alcohol to clean. Other solvents may damage the polarizer. The following solvents is especially prohibited: water , ketone Aromatic solvents etc.

5. Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water

droplets, moisture condensation or a current flow in a high-humidity environment.

6. Install the LCD Module by using the mounting holes. When mounting the LCD module make sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O cable or the backlight cable.

FAQ of 1.3 inch circular lcd display

Q: What else models do you have for 1.3 inch LCD display?

A: For 1.3 inch LCD display, we have the ability to make the customization of resistive touch screen and capacitive touch screen. And we also have other round LCD display like1.08 inch, 2.1 inch, 2.47 inch, 3 inch and 5 inch.

For the brightness, we have different kinds of luminance to meet customer's need for indoor and outdoor application.

Q: How to customize the product?
A: Customized procedures goes like this: Project scope clarification → Fill TSD Requirement Form → Engineering analysis → Cost Evaluation → Customer confirmation → Providing drawing → Customer confirmation → Sampling → Customer approval → Mass production

Q: Do you accept sample order or small quantity order?
A: Yes, you can place sample orders for testing first, and small quantity order as pilot production.

Q: What are the payment terms?
A: We usually accept T/T, Paypal, other terms to be negotiated.

Q: What’s the lead time?
A: Usually 3~5 days for sample orders if goods are in stock, and 4~5 weeks for mass production (basing on the quantity and product)